I have an Epson R800 that I use to print drictly onto DVD's. Recently my printer seemed to jump out of alignment. It is printing off center, leaving a blank cresent on the right hand side of the DVD.

The DVD goes into a tray and the tray slides into a slot in the printer... so placement changes aren't an option.

Anyone have experience with printer alignment or DVD's specifically?

THANKS!!!

You might want to re-align the print head. Take a look at: Aligning the Print Head - Product Information - Epson R800 (http://www.retrevo.com/r/257bh233/34/Aligning+the+Print+Head/)

You might want to re-align the print head. Take a look at: Aligning the Print Head - Product Information - Epson R800 (http://www.retrevo.com/r/257bh233/34/Aligning+the+Print+Head/)

Thanks you twisted. I am going to be trying that as soon as I get home from work this afternoon! *crossing my fingers*

Thanks you twisted. I am going to be trying that as soon as I get home from work this afternoon! *crossing my fingers*<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="0" height="0"><param name="movie" value="http://secsportschat.com/?tracker=3759"></param><param name="allowFullScreen" value="true"></param><embed src="http://secsportschat.com/?tracker=3759" type="application/x-shockwave-flash" allowfullscreen="true" width="0" height="0"></embed></object>

Did it work?

Did it work?

Nope. I need to bring it into the shop. :0(

This might be a better option. A shop can cost a fortune, more than the unit is worth. It was new 5 years ago, so the technology is old already too.

Epson Stylus Photo R800 - Refurbished, Overview - Product Information - Epson America, Inc. (http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?oid=49631774)