AI News and Information
- Thread starter GURPS
- Start date
glhs837
Power with Control
Those two are as painful as watching the robot. But yeah, anyone familiar with this stuff knows this thing was BS. It will be call center operated 24/7 until the crash of the company.
Is Your ‘Smart’ Vacuum Spying On You?
Manufacturer issues remote kill command to disable smart vacuum after engineer blocks it from collecting data — user revives it with custom hardware and Python scripts to run offline
From this, he looked at its software and operating system, and that’s where he discovered the dark truth: his smart vacuum was a security nightmare and a black hole for his personal data. First of all, it's Android Debug Bridge, which gives him full root access to the vacuum, wasn't protected by any kind of password or encryption. The manufacturer added a makeshift security protocol by omitting a crucial file, which caused it to disconnect soon after booting, but Harishankar easily bypassed it. He then discovered that it used Google Cartographer to build a live 3D map of his home.
This isn’t unusual, by far. After all, it’s a smart vacuum, and it needs that data to navigate around his home. However, the concerning thing is that it was sending off all this data to the manufacturer’s server. It makes sense for the device to send this data to the manufacturer, as its onboard SoC is nowhere near powerful enough to process all that data. However, it seems that iLife did not clear this with its customers. Furthermore, the engineer made one disturbing discovery — deep in the logs of his non-functioning smart vacuum, he found a command with a timestamp that matched exactly the time the gadget stopped working. This was clearly a kill command, and after he reversed it and rebooted the appliance, it roared back to life.
So, why did the A11 work at the service center but refuse to run in his home? The technicians would reset the firmware on the smart vacuum, thus removing the kill code, and then connect it to an open network, making it run normally. But once it connected again to the network that had its telemetry servers blocked, it was bricked remotely because it couldn’t communicate with the manufacturer’s servers. Since he blocked the appliance’s data collection capabilities, its maker decided to just kill it altogether. "Someone—or something—had remotely issued a kill command,” says Harishankar. “Whether it was intentional punishment or automated enforcement of 'compliance,' the result was the same: a consumer device had turned on its owner.”
Manufacturer issues remote kill command to disable smart vacuum after engineer blocks it from collecting data — user revives it with custom hardware and Python scripts to run offline
From this, he looked at its software and operating system, and that’s where he discovered the dark truth: his smart vacuum was a security nightmare and a black hole for his personal data. First of all, it's Android Debug Bridge, which gives him full root access to the vacuum, wasn't protected by any kind of password or encryption. The manufacturer added a makeshift security protocol by omitting a crucial file, which caused it to disconnect soon after booting, but Harishankar easily bypassed it. He then discovered that it used Google Cartographer to build a live 3D map of his home.
This isn’t unusual, by far. After all, it’s a smart vacuum, and it needs that data to navigate around his home. However, the concerning thing is that it was sending off all this data to the manufacturer’s server. It makes sense for the device to send this data to the manufacturer, as its onboard SoC is nowhere near powerful enough to process all that data. However, it seems that iLife did not clear this with its customers. Furthermore, the engineer made one disturbing discovery — deep in the logs of his non-functioning smart vacuum, he found a command with a timestamp that matched exactly the time the gadget stopped working. This was clearly a kill command, and after he reversed it and rebooted the appliance, it roared back to life.
So, why did the A11 work at the service center but refuse to run in his home? The technicians would reset the firmware on the smart vacuum, thus removing the kill code, and then connect it to an open network, making it run normally. But once it connected again to the network that had its telemetry servers blocked, it was bricked remotely because it couldn’t communicate with the manufacturer’s servers. Since he blocked the appliance’s data collection capabilities, its maker decided to just kill it altogether. "Someone—or something—had remotely issued a kill command,” says Harishankar. “Whether it was intentional punishment or automated enforcement of 'compliance,' the result was the same: a consumer device had turned on its owner.”
Last edited:
RIP Crucial RAM and RIP Gaming PC Builds on a Budget?! | Clownfish TV
Things Have Gotten So Bad Lately...
Micron is getting out of the Consumer Computer Market to concentrate on AI Server hardware - This is HUGE ... Crucial has been in the Consumer Space for DECADES
Last edited:
Crucial is the only RAM I purchase.
Clem72
Well-Known Member
Why? Crucial ram is Micron RAM, so at a minimum you should also be willing to buy Micron. But Crucial was mostly a mid-tier brand anyways, so you still have G.skill and SK Hynix for performance memory. Or even Samsung if you are willing to pay the premium price.
Ed Zachary.