Help!!! I have a Gateway flat screen monitor (about 3 years old) and yesterday the right side of the screen stopped working. The right half of the screen is pretty much white with a few very thin red and blue verticle lines every 2 inches or so. My question is, is there a way to know if the problem is the monitor or the video card? I don't have a spare monitor or PC so I can't try switching monitors or testing the "bad" monitor on a different PC. Just wondering if anyone has any suggestions before I go buy a new monitor. TIA!
Only left side of screen/monitor works!
- Thread starter lmwelch
- Start date
kwillia
n/a
I remember when yours ran out of red fluid and all your colors were displaying in funky shades.
Horrors!
GWguy
*
Any pools of color on the desk?
desertrat
0_0
See what happens when you unplug it from the computer.
Homer J
Power Chord
Maybe it had a stroke. :shrug:
itsbob
I bowl overhand
You may need to reboot your monitor.
Unplug all the cables.. don't forget the VGA and the power cable.
Firmly grasp both sides of the monitor and pick it up off of your desk.
Hold it over your head and shake vigoursly.
This should put all the pixels back in place and you should be good for another 4 or 5 years before you have to do it again (depending on usage)
Unplug all the cables.. don't forget the VGA and the power cable.
Firmly grasp both sides of the monitor and pick it up off of your desk.
Hold it over your head and shake vigoursly.
This should put all the pixels back in place and you should be good for another 4 or 5 years before you have to do it again (depending on usage)
kwillia
n/a
:etch-A-sketch:
ocean733
New Member
belvak
Happy Camper
clevalley
...
clevalley
...
I have to remember that next time I get a user asking about display issues.
G1G4
Find em Hot, Leave em Wet
Should have bought a Dell.
