BMG metals see attachedAnyone know where I can buy some. Looking for about 16 to 18 gauge, 4x4 sheet.
Building a still are we?Anyone know where I can buy some. Looking for about 16 to 18 gauge, 4x4 sheet.
4'x4', I expect to have to have to practice some. I do have a shear available.4x4 inches?
For high quality copper you can't beat http://www.southerncopper.com/
For what it looks like you want try https://www.mcmaster.com/#copper/=15kleh2
Places like Deans could get it, but it would be expensive, I'm sure.Call the roofing center, they should sell copper flashing.
White Plains is perfect, I'll be within 2 miles of there tomorrow.Roof Center
White Plains, MD
10510 Middleport Lane
White Plains, MD 20695
PH: (301) 374-9319
FX: (301) 374-9324
Local enough ?? I'm sure a phone call to see what they have is easy. And if they have what you want a Visa / Master Card will easily have it delivered to your door.
Non ferris and lots of standard metals / mesh and gratings is something that just doesn't get stocked by local steel supply houses. If it's not a big seller it is not stocked or just not sold by places like Posner's.
Can Posner's get it for you, " sure " but you will pay a HUGE premium for it. And unless you buy scraps or cutoffs from a company or scrapyard you are going to pay a premium.
Also call the steel yards down 301 in VA and see what they stock. Most of them deliver once a week to southern Md or more often.
Good Luck.
Funny what people envision from such scant info.
AND WHAT'S THE 2ND?!?!!?!?!There are 2 kinds of people in the world:
1) Those who can extrapolate from incomplete data.
There are 2 kinds of people in the world:
1) Those who can extrapolate from incomplete data.
AND WHAT'S THE 2ND?!?!!?!?!![]()
Glad it worked for you, and I know of at least two in the upper half of the county. When folks find out you can tig and high pressure braze, you learn alot about the hobbies people have.Just to add some closure to this thread, I did get some copper in white plains. It was thinner than I really wanted, but it works fine for practicing. I also found that if you do want a still you can get them in kit form at a hundred different web sites.