Structural engineer for existing residential structure evaluation?

Kinnakeet

Well-Known Member
What is it and we will inform you of what needs to done unless it has something to do with a EV then your on your own.
 

PeoplesElbow

Well-Known Member
My advise as an engineer and someone who has seen the 1986 Tom Hanks/Shelly Long comedy "The Money Pit" is don't buy a house that needs evaluated.
 

glhs837

Power with Control
What is it and we will inform you of what needs to done unless it has something to do with a EV then your on your own.
Elon can do it, if he can't figure it out, he can bullshit his way thru it!

Guys keep this crap to the EV car threads, please.
My advise as an engineer and someone who has seen the 1986 Tom Hanks/Shelly Long comedy "The Money Pit" is don't buy a house that needs evaluated.

I agree, but its not me. When the coworker says that the "window wall" that was built by the homeowner bows a bit when you press the center, my advice was to get an engineer. Oddy enough, when looking for one locally it didnt appear there were any.
 

phreddyp

Well-Known Member
Guys keep this crap to the EV car threads, please.


I agree, but its not me. When the coworker says that the "window wall" that was built by the homeowner bows a bit when you press the center, my advice was to get an engineer. Oddy enough, when looking for one locally it didnt appear there were any.
J.F Taylor LP city
Chopp truss plant Waldorf
Quit your whining!
 

PeoplesElbow

Well-Known Member
Guys keep this crap to the EV car threads, please.


I agree, but its not me. When the coworker says that the "window wall" that was built by the homeowner bows a bit when you press the center, my advice was to get an engineer. Oddy enough, when looking for one locally it didnt appear there were any.
That sounds bad
 

glhs837

Power with Control
J.F Taylor LP city
Chopp truss plant Waldorf
Quit your whining!

Quit being a bitch with no answers. J.F Taylor is great if you need some aviation engineering support. House structures not so much.


And if it were a roof issue maybe Chopp would be good, although back when I sold Chopp trusses they only designed new to order or sold stock sizes. Sent some takeoffs to them back in the day.

If you are through being an uninformed kbitzer, the door is that way.
 

Gilligan

#*! boat!
PREMO Member
Quit being a bitch with no answers. J.F Taylor is great if you need some aviation engineering support. House structures not so much.


And if it were a roof issue maybe Chopp would be good, although back when I sold Chopp trusses they only designed new to order or sold stock sizes. Sent some takeoffs to them back in the day.

If you are through being an uninformed kbitzer, the door is that way.
I had a hell of a time finding an engineer to sign off on the foundation design for our new home back in 2012. (I'm an engineer and designed the massive foundation under our new home....but can't sign off on a design in the county). I'd recommend him..but he passed away years ago. Phred might have meant to refer to Bob Taylor Engineering. Bob's company did the ground penetration and soil compaction testing and all inspection of the resulting foundation construction for my site, but don't design them.
 

glhs837

Power with Control
I had a hell of a time finding an engineer to sign off on the foundation design for our new home back in 2012. (I'm an engineer and designed the massive foundation under our new home....but can't sign off on a design in the county). I'd recommend him..but he passed away years ago. Phred might have meant to refer to Bob Taylor Engineering. Bob's company did the ground penetration and soil compaction testing and all inspection of the resulting foundation construction for my site, but don't design them.

I looked at Bobs site, I didn't see residential structure type stuff above foundation level.
 

phreddyp

Well-Known Member
Quit being a bitch with no answers. J.F Taylor is great if you need some aviation engineering support. House structures not so much.


And if it were a roof issue maybe Chopp would be good, although back when I sold Chopp trusses they only designed new to order or sold stock sizes. Sent some takeoffs to them back in the day.

If you are through being an uninformed kbitzer, the door is that way.
You asked for an engineer moron, contact one of them and ask for what you desire, they all know one another. Grow a set and act like an adult. You get a referral from a GP to a specialist don't you ? Now I understand your shortcomings no imagination and not being able to problem solve. Lol
 

glhs837

Power with Control
You asked for an engineer moron, contact one of them and ask for what you desire, they all know one another. Grow a set and act like an adult. You get a referral from a GP to a specialist don't you ? Now I understand your shortcomings no imagination and not being able to problem solve. Lol

I looked around and as Gil said, there are not any local. I asked for an residential structural engineer just in case someone knows one who runs under the radar. Last time I needed an oddball thing that wasn't apparent, the nice folks here hooked me up with a recommendation for a fabricator who appeared on no listings at all because he worked out of his house on the side by word of mouth. Heated his house with coal of all things. Really cool gent with an amazing history. Had what amounted a small machine shop in his garage. Even found a guy who had a stash of Ford 390 engines in a barn out near Breton Bay helped me out with an oil pan. And if you cannot comprehend that there are different types of engineers for different jobs, maybe keep your yap shut when people are talking. Also, your thoughts about me go way deeper than they should about someone you don't know. I'm done talking to you now.
 

Gilligan

#*! boat!
PREMO Member
You asked for an engineer moron, contact one of them and ask for what you desire, they all know one another. Grow a set and act like an adult. You get a referral from a GP to a specialist don't you ? Now I understand your shortcomings no imagination and not being able to problem solve. Lol
You honestly think JF Taylor does home inspections???
 

Gilligan

#*! boat!
PREMO Member
I looked around and as Gil said, there are not any local. I asked for an residential structural engineer just in case someone knows one who runs under the radar. Last time I needed an oddball thing that wasn't apparent, the nice folks here hooked me up with a recommendation for a fabricator who appeared on no listings at all because he worked out of his house on the side by word of mouth. Heated his house with coal of all things. Really cool gent with an amazing history. Had what amounted a small machine shop in his garage. Even found a guy who had a stash of Ford 390 engines in a barn out near Breton Bay helped me out with an oil pan. And if you cannot comprehend that there are different types of engineers for different jobs, maybe keep your yap shut when people are talking. Also, your thoughts about me go way deeper than they should about someone you don't know. I'm done talking to you now.

i ended up with most of the engines that came out of that barn. ;-)
 

RoseRed

American Beauty
PREMO Member
You asked for an engineer moron, contact one of them and ask for what you desire, they all know one another. Grow a set and act like an adult. You get a referral from a GP to a specialist don't you ? Now I understand your shortcomings no imagination and not being able to problem solve. Lol
Why are you always a ray of sunshine?
 

phreddyp

Well-Known Member
Why are you always a ray of sunshine?
You try to help, and get crap for it. I have little or no tolerance for ungrateful people or hypocrites. You don't like it change the channel, that is your prerogative. No skin off my back.
 

PeoplesElbow

Well-Known Member
You asked for an engineer moron, contact one of them and ask for what you desire, they all know one another. Grow a set and act like an adult. You get a referral from a GP to a specialist don't you ? Now I understand your shortcomings no imagination and not being able to problem solve. Lol
I'll write him a referral to have an Eddy current done.
 
Top