Weekend Bike Mods

ylexot

Super Genius
Since I have this nice 5-day weekend, I did some work on my bike. I started off on Friday with an oil change which apparently has never been done on the bike because the drain plug was still factory-gorilla-tight. Got that done and proceeded to install a Factory Pro shift kit (a highly recommended modification for the YZF600). Of course, I didn't have the right size socket for that (27mm), so I had to run to the store to try and find one. I finally finished that...and then found out that I screwed something up. There are two different length clutch springs and you are supposed to alternate them (I didn't notice that they were different lengths). :doh: So, I opened it back up on Saturday and fixed my mistake. :yay: Then I installed my new windscreen. :cool: Today, I worked on drivetrain. I replaced the sprockets and chain...sprockets went from a 15/47 setup to a 14/49 and the chain was slightly rusty, but usable when I got it. I decided to change it while doing the sprocket change to be on the safe side. After that, I cleaned myself up and took it for a quick spin around the block to make sure everything was functioning properly and everything worked flawlessly :yahoo: So then I sat back with a cigar and a few beers while I put the fairings back on and admired my handiwork :cheers: Hopefully the weather will be good enough to go for some short rides on Monday and Tuesday. Here are some pics of the final product. I put all the reflective stuff on a while ago.
 

Attachments

  • IMG_0436small.jpg
    IMG_0436small.jpg
    35.1 KB · Views: 100
  • IMG_0437small.jpg
    IMG_0437small.jpg
    31.4 KB · Views: 90
  • IMG_0438small.jpg
    IMG_0438small.jpg
    39.5 KB · Views: 99
  • IMG_0439small.jpg
    IMG_0439small.jpg
    29.4 KB · Views: 91
Top