About to tackle my first AR build, is there any special tools needed or can this be accomplished with "household" tools?
are you starting with an 80% Lower
are you starting with an 80% Lower
As long as he had the lower completed before October 1st he's good to go. I got two stripped lowers in my safe ready to be built.
I have enough trouble working a hammer.
As long as he had the lower in before October 1st he's good to go.
I got two stripped lowers in my safe ready to be built.
Finishing one is not a trivial task and for a while there, 80% lowers were bringing as much as finished ones normally would cost.
I'm thinking the 80% lower craze has about run its course. Finishing one is not a trivial task and for a while there, 80% lowers were bringing as much as finished ones normally would cost.
I'm having a hard time figuring out what is still legal and what is not as far as rifles go in MD now..still quite a selection of "scary black rifles" for sale at Bob's, for example.
maybe a AK Flat would be an easier project ?
Unfortunately, it all doesn't matter, because both AR-15 and AK receivers 80% or 100% are illegal now anyway.
source ?
SB281.
Sure, you could buy an 80%, because in the eyes of the ATF, it's a paperweight made of aluminum or polymer.
did MD stipulate you cannot manufacture your own Firearm ... the whole point of 80% lowers, is the law [Federal] does not restrict a person from making their own NON Class II or III Firearm
really ?
I know you do machine work, with the JIGS is it really that difficult to mill out the center and drill 3 holes ?