Does something like this exist

PeoplesElbow

Well-Known Member
I'm looking for a solid 1 piece plastic or metal ring that I could put around my hostas fill up with dirt and then put rock around them. Slices of 2ft black PVC pipe would be perfect.

Something like this must exist but I sure can't find it. I searched for bush ring, not at all what I was looking for......
 

itsbob

I bowl overhand
We bought metal tree rings at Lowes, how many sections you used determined the size of the circle.. Three sections made for about a 2 foot diameter ring
 

black dog

Free America
Not necessarily decorative, something to keep the dirt in and the rock out. I want a 2ft circle of humped up dirt surrounded by rock.

Tire Blossoms made from small motorcycle or trailer tires...

148012
 

PeoplesElbow

Well-Known Member
2" ABS pipe from Lowes should do it and be cheap.
That is what I was thinking, but I am not sure I can cut rings from it that look nice, too big for the miter saw and table saw, not sure I want to sent plastic through my bandsaw or that if it would even give a good even cut.
 

Chris0nllyn

Well-Known Member
That is what I was thinking, but I am not sure I can cut rings from it that look nice, too big for the miter saw and table saw, not sure I want to sent plastic through my bandsaw or that if it would even give a good even cut.

Bandsaw (if you have a fence) or even a table saw if the pipe end against the fence and rotate over the blade.

There will be plastic shavings everywhere but it'll be a clean cut. Maybe take a small file and hit the inside and outside edges to de-burr them.

The hostas should hide them pretty well when grown.
 

SandieGarry

Well-Known Member
Actually, what I did was take a plastic flower pot and cut the bottom out. Then I slipped it over the plant. Worked great. Been there at least 5 years.
 

black dog

Free America
That is what I was thinking, but I am not sure I can cut rings from it that look nice, too big for the miter saw and table saw, not sure I want to sent plastic through my bandsaw or that if it would even give a good even cut.
Most times when you cut plastic flip the blade around backwards and it will slice the plastic vers cuting chunks.
No difference if its a miter, circular, table or bandsaw. If you watch guys that do vinyl sideing with a delta sawbuck the carbide wood blade is running backwards.
 

PeoplesElbow

Well-Known Member
Most times when you cut plastic flip the blade around backwards and it will slice the plastic vers cuting chunks.
No difference if its a miter, circular, table or bandsaw. If you watch guys that do vinyl sideing with a delta sawbuck the carbide wood blade is running backwards.
I've cut plexiglass before and have had pretty decent luck using a blade with a negative rake angle, still isnt my favorite thing to do.
 

black dog

Free America
I've cut plexiglass before and have had pretty decent luck using a blade with a negative rake angle, still isnt my favorite thing to do.

With sheet plastics like plexi, acrylics, HDPE, UHMW and others I have a 8' metal shear...
With flipping the blade around you elimate blowouts, shattering among other problems......
 
Top