As said the nozzle is where the oil gets sprayed in a specific pattern for the burner. Typically it is easily removed with a 5/8 socket or wrench and if you can't locate a spare you can boil them clean (it will have a fine screen filter on the back of it) with a little grease cutting detergent like Dawn. When was the last time your burner was serviced?pvineswinger said:The road here is still a sheet of ice- and I can't get anywhere to get a new filter- and what is the nozzle?
I just bought this house last March-and winter was pretty much over by then- so I'm not sure.Ken King said:As said the nozzle is where the oil gets sprayed in a specific pattern for the burner. Typically it is easily removed with a 5/8 socket or wrench and if you can't locate a spare you can boil them clean (it will have a fine screen filter on the back of it) with a little grease cutting detergent like Dawn. When was the last time your burner was serviced?
Was it out of fuel oil when you moved in or did it run out anytime during the time you have owned it? If so you probably need both the filter and a nozzle.pvineswinger said:I just bought this house last March-and winter was pretty much over by then- so I'm not sure.
It never ran out. In fact that was the first thing they asked me- and they just filled it on Jan 11. and it stopped running yesterday. I doubt we went through 280 gallons of oil in 11 days.Ken King said:Was it out of fuel oil when you moved in or did it run out anytime during the time you have owned it? If so you probably need both the filter and a nozzle.
pvineswinger said:I just bought this house last March-and winter was pretty much over by then- so I'm not sure.
I have SoMd Oil- and they weren't listed in the phone book as heating/ventilation contractors. Maybe I should have gone with Besche or Burchoil.dmc854 said:PVine, whomever provides your oil, they will service your furnace. I have had the nozzle replaced and it wasn't that much. Good thang ya have a woodstove!
ohhhhhhh, I am with Ridgell and they have come out and fixed my furnace including the red reset switch. Call them anyway. They might have an emergency service. And I have LOTS of seasoned wood up here, free for the taking.pvineswinger said:I have SoMd Oil- and they weren't listed in the phone book as heating/ventilation contractors. Maybe I should have gone with Besche or Burchoil.![]()
Unsure about the clicking of the ignitor. But with any oil burner they have igniters and an optical sensor that detects the light from the fire. If it doesn't see burning then it will shut down, usually after about 10 to 15 seconds or so. I'm betting that your nozzle is plugged and that you are also in dire need of a filter. Filters are about a buck and the nozzles run about 5 if you can find them. A service call without contract will run between 50 and 80.pvineswinger said:It never ran out. In fact that was the first thing they asked me- and they just filled it on Jan 11. and it stopped running yesterday. I doubt we went through 280 gallons of oil in 11 days.
It has an electronic ignitor (not a pilot light) and I think there is something wrong with the ignitor. i tried to reset it and the ignitor clicks a few times but doesn't "catch."
I'll stop by when I'm getting smokes! ha ha.dmc854 said:ohhhhhhh, I am with Ridgell and they have come out and fixed my furnace including the red reset switch. Call them anyway. They might have an emergency service. And I have LOTS of seasoned wood up here, free for the taking.
it doesn't have a sensor then because the blower ran for three hours last night- blowing cold air. It probably does need serviced...I guess I'm going to have to get a service contract for the future.Ken King said:Unsure about the clicking of the ignitor. But with any oil burner they have igniters and an optical sensor that detects the light from the fire. If it doesn't see burning then it will shut down, usually after about 10 to 15 seconds or so. I'm betting that your nozzle is plugged and that you are also in dire need of a filter. Filters are about a buck and the nozzles run about 5 if you can find them. A service call without contract will run between 50 and 80.
Not knowing your system I am unsure as to why the blower would continue without the presence of heated air (might simply be a switch setting). It also might be a controller issue and then you are talking money. My oil burner is for a boiler system as I have hot-water baseboard and have replaced everything on it myself over the years.pvineswinger said:it doesn't have a sensor then because the blower ran for three hours last night- blowing cold air. It probably does need serviced...I guess I'm going to have to get a service contract for the future.(I'll probably never need it ever again! It's like pet health insurance!)
Wonder who this could of been? wer is back, as of about 4:30, but the heatpumps can't catch back up,STILL 62 degree s in the house!BadGirl said:I just got a call from someone over in Solomon's. He's been without power since about 7:00 am today. He mentioned the Food Lion shopping center was out, too.
All you can do is give it some time to do it's work. One of the reasons I bought this house is because it had a fireplace. I had the fire going in about 15 minutes after I lost electrical. True, I burned a bunch of wood in 7 hours, but it kept the temps up to around 60 degrees all the time.itsbob said:Wonder who this could of been? wer is back, as of about 4:30, but the heatpumps can't catch back up,STILL 62 degree s in the house!
I have been EXTREMELY thankful for my woodstove this weekend. it sucks having to wake up every other hour to throw wood on the fire- but it's better than freezing!! My woodstove has kept my WHOLE house (about 1200 sq.ft.) at b/w 63-68 degrees- I'm amazed!Penn said:All you can do is give it some time to do it's work. One of the reasons I bought this house is because it had a fireplace. I had the fire going in about 15 minutes after I lost electrical. True, I burned a bunch of wood in 7 hours, but it kept the temps up to around 60 degrees all the time.
Now the new heatpump I put in last May is doing it's thing, and the thermostat says 68. I can live with that.
I'm wondering about the folks in trailers and those without a fireplace; it's not got above 17 all day, I imagine. We can only pray for those people.![]()
Upstairs never dipped below 60, broug t my kerosene heater in at noon, kept it around 63 on the main floor was REALLY cold in my oldest's room on the ground floor! How my upstairs stayed so warm is beyond me!Penn said:All you can do is give it some time to do it's work. One of the reasons I bought this house is because it had a fireplace. I had the fire going in about 15 minutes after I lost electrical. True, I burned a bunch of wood in 7 hours, but it kept the temps up to around 60 degrees all the time.
Now the new heatpump I put in last May is doing it's thing, and the thermostat says 68. I can live with that.
I'm wondering about the folks in trailers and those without a fireplace; it's not got above 17 all day, I imagine. We can only pray for those people.![]()
My upstairs stayed pretty warm too. I took a nap around 12:00pm, hoping by the time I awoke the power would be back on. Right! Not for a few more hours.itsbob said:Upstairs never dipped below 60, broug t my kerosene heater in at noon, kept it around 63 on the main floor was REALLY cold in my oldest's room on the ground floor! How my upstairs stayed so warm is beyond me!
Heat risesitsbob said:Upstairs never dipped below 60, broug t my kerosene heater in at noon, kept it around 63 on the main floor was REALLY cold in my oldest's room on the ground floor! How my upstairs stayed so warm is beyond me!