Unclear channels

Baja28

Obama destroyed America
Channels 2, 3, 4, 5, 6, & 7 have diagonal lines across the screen with 5 being the worst. All other channels are crystal clear. I have metrocast. Just started doing this about 2 weeks ago. Any ideas?
 

DoWhat

Deplorable
PREMO Member
Channels 2, 3, 4, 5, 6, & 7 have diagonal lines across the screen with 5 being the worst. All other channels are crystal clear. I have metrocast. Just started doing this about 2 weeks ago. Any ideas?

It's the TV. Go buy a new one.
 

bresamil

wandering aimlessly
Channels 2, 3, 4, 5, 6, & 7 have diagonal lines across the screen with 5 being the worst. All other channels are crystal clear. I have metrocast. Just started doing this about 2 weeks ago. Any ideas?
So just the local channels then? What did Metrocast say when you asked them?
 

Dutch6

"Fluffy world destroyer"
Haven't called them yet. Thought I'd ask here 1st. Are yours ok?
If only certain channels are out and others are fine you need to get on the horn to Metrocast. There's nothing wrong with your TV. This have been a PSA. Thank you.
 

bresamil

wandering aimlessly
Haven't called them yet. Thought I'd ask here 1st. Are yours ok?

We don't have television here. Only internet. We watch everything the day after, online. I'd call them because it sounds like their local feed is messed up.
 

Baja28

Obama destroyed America
:diva: I fixed it! :diva:

Well I was actually the one who messed it up to begin with... :lmao:

About 2 weeks ago, I found a short piece of coax with factory connectors. I figured it was better than my home made piece I was using so I swapped them. I just switched back to my piece and guess what? No more diagonal lines. :yahoo:
 

RPMDAD

Well-Known Member
Good fix Baja. I probably would not have thought of that, because you stated all the other channels were fine.
 

Baja28

Obama destroyed America
Good fix Baja. I probably would not have thought of that, because you stated all the other channels were fine.
Must be something with the lower frequency band that piece of cable didn't like. I'm happy it's clear since that is my Daytona 500 channel! :yahoo:
 

Merlin99

Visualize whirled peas
PREMO Member
:diva: I fixed it! :diva:

Well I was actually the one who messed it up to begin with... :lmao:

About 2 weeks ago, I found a short piece of coax with factory connectors. I figured it was better than my home made piece I was using so I swapped them. I just switched back to my piece and guess what? No more diagonal lines. :yahoo:

Cheap factory ones only have about 35% shielding, regular RG-6 cable is usually closer to 90% shielded. You could have been picking up television power supply noise through the leaky shielding.
 

aps45819

24/7 Single Dad
Channels 2, 3, 4, 5, 6, & 7 have diagonal lines across the screen with 5 being the worst. All other channels are crystal clear. I have metrocast. Just started doing this about 2 weeks ago. Any ideas?

Watch the HD versions
4 = 101-2
5 = 105-3
6 = 123-4
7 = 102-4
9 = 101-3
 

Bay_Kat

Tropical
:diva: I fixed it! :diva:

Well I was actually the one who messed it up to begin with... :lmao:

About 2 weeks ago, I found a short piece of coax with factory connectors. I figured it was better than my home made piece I was using so I swapped them. I just switched back to my piece and guess what? No more diagonal lines. :yahoo:

That happened to me once, glad you fixed yours.
 
Top