Cabinet Plywood

[zetasoul]

Does anyone know of a place in Southern Maryland that carries cabinet grade plywood and veneer? I have been searching all over and couldn't find anything except 84 Lumber. The one promising place I found is Chesapeake Plywood in Baltimore, but that's a little too far since they don't open on the weekend and are always closed by the time I'm off work. Any help would be appreciated.

Thanks

 

[huntr1]

You're gonna have to mail order it, or hardware stores can all special order as well. You'd be better off going to the local chains for the special order than the national chains.

 

[Vince]

Don't use veneers much. I work with all regular hardwoods. Had occasion to need veneer for some inlay work and had to order it through the mail, Woodworkers Supply.

 

[limblips]

Does anyone know of a place in Southern Maryland that carries cabinet grade plywood and veneer? I have been searching all over and couldn't find anything except 84 Lumber. The one promising place I found is Chesapeake Plywood in Baltimore, but that's a little too far since they don't open on the weekend and are always closed by the time I'm off work. Any help would be appreciated.

Thanks

Lowes has oak, birch faced cabinet grade ply. Not cheap. If by veneer you mean the thin stuff to cover the edges, they have the iron on. If you want sheets of veneer, you will have to travel or go online. Woodcraft has it.

 

[Vince]

Lowes has oak, birch faced cabinet grade ply. Not cheap. If by veneer you mean the thin stuff to cover the edges, they have the iron on. If you want sheets of veneer, you will have to travel or go online. Woodcraft has it.

And depending upon what you want, they used to carry 4x8 sheets of oak veneer plywood. It's expensive and not something you want to make a mistake with.

 

[Dukesdad]

Dysons has the plywood. Can't remeber where I order the last veneer but it was a lot less expensive than woodcraft or woodworkers supply. It was a place out of upstate New York. do some googling and see what ya find

 

[Bronwyn]

Does anyone know of a place in Southern Maryland that carries cabinet grade plywood and veneer? I have been searching all over and couldn't find anything except 84 Lumber. The one promising place I found is Chesapeake Plywood in Baltimore, but that's a little too far since they don't open on the weekend and are always closed by the time I'm off work. Any help would be appreciated.

Thanks

Dean Lumber on 235